Dental marketing budget: how to set one for your practice
Published
In short
Set your dental marketing budget from a goal, before you look at what's left in the bank account. The goal is the number of patients your dentist can still see in a month for the service you advertise. From there, work back to the number of leads you need and multiply it by what one lead costs your practice. Keep that budget the same for a period you choose before the ads start, so you have something to compare. A table to fill in is below.
Who this is for
This is for you if your practice has open chair time for elective treatment and advertises without a set amount. One month it spends more, and another month it spends nothing. It also helps if your agency has proposed a budget and you want to check whether that amount fits your practice.
You won't find a dollar amount to spend here. We don't know your open chair time or your cost per lead, and without them any amount would be a guess. We also don't give a percentage of revenue, because a percentage says nothing about how many patients your dentist can still see. If your dentist's schedule is booked several months out, set this article aside. Your practice would have no time to see new patients from ads.
We wrote this at Helpify. Helpify brings patients to dental practices and follows up so they make it to the chair. You can read more on the About Helpify page.
Working backward: from open chair time to a budget
Start at the end, with the patient in the chair. Then work back one row at a time until you reach a dollar amount. Write your own numbers in the last column.
| Number | Where to get it | Your value |
|---|---|---|
| 1. Patients who should come in this month | Your schedule: how many open slots your dentist has this month for this service. Your goal can't be higher than that. | |
| 2. Booked appointments | Row 1 divided by the share of booked patients who show up at your practice. Take it from your schedule for the last three months. | |
| 3. Leads | Row 2 divided by the share of leads that end in a booked appointment. Work it out from your list of leads and your schedule. | |
| 4. Cost per lead | Ad spend for the last three months divided by the number of leads from those ads. | |
| 5. Monthly budget | Row 3 times row 4. |
Do the math for one service. Another service has different open slots and different patients, and it may have a different cost per lead. That's why each service gets its own table.
Illustrative example, fictional data. These are not Helpify's results, our fees, or typical numbers for a practice. The dentist has 12 open consultation slots this month, and the practice wants to fill 9 of them. The schedule shows that 3 out of 4 booked patients show up, so the front desk needs to book 12 appointments. The front desk books an appointment with 1 out of every 3 leads, so the practice needs 36 leads. Over the last three months, one lead cost $50. The monthly budget is 36 times $50, which comes to $1,800.
Look at the two middle rows, too. If a smaller share of booked patients shows up, or fewer leads end in an appointment, the same goal takes a bigger budget. Before you change the amount, check those two numbers.
Where to get your cost per lead
If your practice ran ads in the last three months, you need two numbers from that period. The first is ad spend, not including your agency's fee. You'll find it in your ad account or in your agency's report. The second is the number of leads from those ads, meaning people who left their number in a form or called. Divide the first number by the second.
Count the leads on your own list and compare that count with the report. If the numbers don't match, ask what the report counts as a lead. Use the number from your own list.
If your practice has never run ads, the first month is for measuring. Pick an amount the practice can spend without knowing what it will bring in, and don't change it until the month is over. Before the ads start, decide who logs every lead. After a month, you have your first cost per lead and can fill in the table. The months after that show whether the cost holds.
Why a "test" budget doesn't test anything
You may hear that advertising is constant testing and that a fixed budget doesn't make sense. You may also worry about burning through the budget, meaning money spent on ads that bring no one in.
A test makes sense when you compare something. Say you spend a lot one month and nothing the next. Then you don't know what drove the result. It could have been the amount, the time of year, or the ad itself. The number of patients at the end of a stretch like that tells you nothing about the budget.
Before the ads start, set a fixed monthly amount. Also decide how many months you'll keep it the same. Write down what result you'll count as good, for example the most you're willing to pay for one patient who showed up. At the end of that period, compare the result with what you wrote down before the start.
If you're worried about burning through the budget, a smaller fixed amount can work. You can judge that one too. Keep in mind that with only a few leads, one good or bad week moves the result a lot.
Your ad budget and your agency's fee
When an agency proposes an amount, first check which amount it means. The ad budget and the agency's fee are two separate amounts. The budget goes to the ad platform that shows your ads, for example on Facebook and Instagram. The agency's fee pays for its work. If someone calls both of them together your marketing budget, split them before you go on.
The table above covers the ad budget only. You add the agency's fee later, when you work out the cost of one patient, which we cover below.
Before you agree to an amount, ask the agency:
- Do I pay the ad budget straight to the ad platform, or through you?
- Does your fee depend on the size of my ad budget?
- Where can I see how much of the budget was spent in a given month?
- What math is the proposed amount based on?
The answers help you put the right amount in the table and compare it with the result later.
How many months to keep the budget the same
We won't give one number of months for every practice, because we don't know of a study that settles it. Set the review period before the ads start and write it down next to the amount. For how to judge a campaign while it's still running, see how to tell if your dental ads are working.
Here we add one rule for the budget. Don't change the amount during the review period. If you change it halfway through, you end up with two shorter periods with different budgets, and you have to start measuring over.
There's one exception. When your dentist has no open slots left, cut the budget or pause the ads. New leads would just wait for an appointment.
When to raise the budget
Raise the budget when two conditions hold at the same time. Your dentist has open slots that the current ads don't fill. The cost of a patient who showed up is within your limit.
You set that limit yourself, before you change the amount. It's the most the practice can spend on one patient who showed up and still have the treatment pay off. The cost per patient is ad spend for the review period divided by the number of patients from ads who came in for a visit. If you pay an agency, add its fee. We go through the math in how to calculate dental patient acquisition cost.
To see how much revenue open chair time costs your practice each month, use the calculator.
When you raise the budget, go back to the table. Put the new goal in row 1 and redo the other rows. Don't assume your cost per lead will stay the same at a higher amount. Check it after the next review period and update row 4.
If your dentist has open slots but the cost per patient is over your limit, don't raise the budget. First check the two middle rows of the table: how many leads end in a booked appointment, and how many booked patients show up.
How we do it
Helpify brings patients to dental practices and follows up so they make it to the chair. We run Facebook and Instagram ads with videos filmed at the practice, and we build a service page with a form. After every lead, the patient gets a confirmation and the front desk gets reminders to call and book. We remind patients about appointments, and after a no-show we help the front desk reschedule. The dashboard shows leads, booked appointments, patients who showed up, and ad spend.
You pay once for the campaign build: the service page, the ad videos, and front desk training. After that, you pay a flat monthly fee for campaign management, and it doesn't start until the day your ads go live. You pay your ad budget separately, straight to Meta. I'll show you the numbers along with a plan for your practice.
Helpify's fee doesn't depend on the size of the practice's ad budget. The agreement covers at least 3 months of ads, counted from the day your ads go live. After that, you can cancel with one month's notice.
Helpify is based in Poland. We work remotely and take on dental practices in Poland and the United States.
Read more on the Helpify System page.
Book a free 30-minute call. It's online, with Maciej Odrobina, the founder of Helpify. Book a call.
Questions and answers
How much should a dental practice spend on advertising?
We won't give an amount, because we don't know your open chair time or your cost per lead. Your budget comes from your goal, meaning the number of patients your dentist can still see. You turn that number into leads and multiply it by your cost per lead. Fill in the table above, and you'll have an amount for your practice.
Who do I pay my ad budget to?
You pay it to the platform that shows your ads, for example on Facebook and Instagram. Ask your agency whether you pay it directly or through them. With Helpify, it works like this: you pay your ad budget separately, straight to Meta.
Does my agency make more money when I raise my ad budget?
It depends on your agreement, so ask your agency directly. It's best to ask before you agree to a bigger amount. With us, it doesn't. Helpify's fee doesn't depend on the size of the practice's ad budget.
What if my practice has never run ads?
Treat the first month as a measurement. Set a fixed amount, log every lead, and work out your cost per lead after a month. Then fill in the table and set the budget from your goal.
